Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones

Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones


Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones


Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones


Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones


Part numbers associated with this listing: 700476005 700479710. And will be set to release version 8.1(95). This system is in Basic or Partner Mode so no key codes are needed. I have taken the time to make sure that release level on the SD card and the 500 V2 Processor initial boot release limitation levels match up and are at least version 8.1 so there is no key code conflict showing up on the system when you connect phones. That each one provides up to 4 analog lines, up to 6 digital phones, up to 2 analog phones and up to 10 VCM channels. All you need to do is add phones. Avaya IP Office Digital Phones. Call Kelly at at your convenience. Scroll down under the pictures and see my store section under. Avaya IP Office Bundles. See more information below. 1 Avaya IP500 V2 Control Unit (700476005). The Avaya IP500 V2 Control Unit is the newest control unit for the Avaya IP Office system. Avaya IP500 V2 Features. 4 Base Card Slots. Also accommodates the Legacy Card Carrier. Supports IP500 trunk daughter cards connected to IP500 Base Cards. Also supports IP400 trunk cards using the Legacy Card Carrier. 2 SD Card Slots. Supports system SD card (required) and optional SD card. Maximum 30 usable for Voicemail Pro/TAPI WAV connection sessions. Support for up to 12 Expansion Modules. In addition to the 8 integrate expansion ports, can add up to 4 additional external expansion modules using 4-Port Expansion base card. Full duplex 10/100 Mbps; managed layer 3 Ethernet switch. Music on-hold, DTE port, external relay switch for door entry controls, integral WAN port. 1 Avaya IP500 V2 System SD Card Mu Law 700479710. IP500 V2 System SD Card Features. Acts as feature key to validate system features. Provides storage for Essential Edition Messaging. Can be preloaded with release, configuration, and feature activations to enable faster implementation. Essential Edition Messaging Features. Included with IP500 V2 system; no license required. Up to 15 hours message storage; Configurable recording time. Help menus, greetings, and mailbox navigation. Configurable system-wide short code for voicemail collect. 40 independent Auto Attendants with 3 time profiles per Auto Attendant; Up to 12 menu items per Auto Attendant with automatic time-out to fallback number. Auto attendant supports Dial by Name and direct Dial by Number. Visual Voice – Access and control of voicemail via the digital or IP terminal display (telephone model dependent). Reply to a message to either an internal or external number (if Caller ID available). Support for hunt group announcements. Fax option for rerouting fax calls via the auto-attendant menu. Support for Fast Forward (#), Rewind , Skip Message (9) and Call Sender when listening to messages. Compatible with IP500 V2 Control Unit (IPO R6 and higher). 2 Avaya IP500 Combination Card w/4 Analog Trunks V2 700504556. The Avaya IP500 Combination Card V2 provides 4 analog trunk ports, 6 digital station ports, 2 analog station ports, and 10 voice compression channels for your IP500 V2 system. Avaya IP500 V2 Combination Card Features. 4 analog trunk ports (9-12) via a pre-installed IP500 Analog Trunk 4 daughter card. 6 digital station ports (1-6). 2 analog station ports (7-8). Maximum 2 per IP500 V2 control unit. Enhancements for IP500 Combination Card V2: Impedance matching to trunk characteristics, improved echo reduction, and reduction of occasional noise. Compatible only with IP500 V2 control unit running IPO 8.1 Feature Pack 1 (8.1.63) or higher. Digital station (DS) ports compatible with Avaya 1400, 2400, 5400, 6400, and 9500 series digital telephones See below for more details for compatible phones in Basic/Partner Mode. For DS ports only the 1400 and 9500 series phones are functional in Basic/Partner Mode. More on Basic Edition/Partner Mode below. (16 August 2012). I have added, changed and or removed some of the content. To see the full version and other installation documents call me. IP Office Basic Edition PARTNER® Mode. The IP Office Basic Edition Partner Mode continues the evolution of communications systems for small businesses. PARTNER Mode is designed to work directly out of the box without any programming or administration, allowing users to immediately make and place calls via analog trunks. PARTNER Mode provides the end user a similar desktop experience as the PARTNER ACS: e. 2 dedicated intercom buttons, key system functionality, Caller ID, etc. This helps minimize training requirements and provides the end user with the same comfort level they have come to expect with the PARTNER ACS system. PARTNER Mode provides enhanced features such as Visual Voice, Remote Call Forwarding, 64-party Conferencing, SIP Trunking, Full PRI/T1 and more. PARTNER Mode provides the same 2-digit extension numbering plan as PARTNER ACS (default), and now supports a 3-digit flexible numbering plan (extensions 100 599). PARTNER Mode supports all current and “Euro” versions of PARTNER ACS telephones, the 1400 Series digital telephones, the current 3920 and 3910 wireless products, as well as most analog devices (fax, wireless headsets, and analog telephones). The original MLS Series telephones and older wireless telephones are not supported. PARTNER Mode also supports a new line of Avaya digital telephones the 9500 Series telephones, and supports the Nortel T-Series and M-Series digital telephones. The Embedded Voicemail offers a variable number of hours of storage. · 2-ports = 15 hours of storage. · 4-ports = 20 hours of storage. · 6-ports = 25 hours of storage. PARTNER Mode supports larger telephone and trunk capacity as follows (may not be attained simultaneously). · Up to 100 digital telephones (1400 Series, 9500 Series, T-series and M-Series telephones). · Up to 100 analog telephones. · Up to 18 PARTNER ETR telephones (additional non ETR telephones can be added total to reach system capacity). · Up to 32 analog CO lines. · 1 PRI/T1 (24 lines). · Up to 20 SIP lines. · can support up to 72 trunks, but not simultaneously. IP Office Basic Edition Mu-Law. When the IP500 V2 containing a IP Office Mu-Law SD card is first started, it will boot-up as “Basic Edition”, which has the same look and feel as PARTNER Mode, supporting out of the box operations, two intercom buttons, key system functionality, voice mailboxes on all telephones, TUI programming support, etc. “Basic Edition” makes starting and using the system quick and easy. Users who need full IP Office Essential Edition functionality (or to operate in IP Office Mode) can apply an SD card with a Key Code for Essential Edition and the use Manager to change mode from “Basic Edition” to “Essential Edition or IP Office Mode”. Once the system reboots, it re-starts as Essential Edition or IP Office Mode. System programming is accomplished in two ways. (TUI) from extension 10 or extension 11; and uses the same administration codes as the PARTNER ACS system. (GUI) PARTNER Mode provides a “Simplified Manager” mode in the IP Office Manager software; allowing you to program the system in less than 30 minutes. PARTNER Mode runs on the IP500 V2 control unit. A PARTNER Mode SD card or IP Office Mu-Law SD card is required and is installed in the rear of the control unit, providing the ability to have advanced features with the key codes to reveal or activate the features. The system will boot up in PARTNER mode or Quick Mode. An optional SD card may be installed in the optional SD card slot, providing redundant backup and system upgrade capabilities. The front of the IP500 V2 Control Unit has 4 expansion bays, which supports the following system modules. Analog Trunks (Max 2 per system). The Combination Card provides 6 digital station (DS) ports (Ports 1-6); 2 analog station ports (Ports 7-8); 4 CO Line ports (Ports 9-12) and 10 Voice Compression Channels. (Max 3 per system). The ETR6 Card provides 6 ETR (PARTNER ACS telephone) station ports (Ports 1-6); and supports (1) of the following optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 7-8 become Power Failure Transfer ports, and ports 9-12 provide 4 additional CO Line Ports. Compatible only with PARTNER Mode and Mu-Law SD cards with Basic Edition, in North America market only. The DS8 Card provides eight digital station ports (Ports 1-8); and supports (1) of the following optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 9-12 provide 4 additional CO Line Ports. This card supports only the 1400 and 9500 Series telephones. (Max 4 per system). The TCM8 Card provides eight digital station ports (Ports 1-8); and supports (1) of the following optional trunk cards: ATM4 or PRI/T1. This card supports only Norstar® T-Series and M-Series telephones. PARTNER Mode supports following expansion modules. Provides additional 16 digital station ports (1400 and 9500 Series telephones only). Provides additional 16 digital station ports (Norstar T-Series and M-Series telephones only). ATM16 (limit 1 per system). Provides additional 16 analog CO lines. Provides additional 16 analog stations. Provides additional 30 analog stations. Provides additional 30 digital station ports (1400 and 9500 Series telephones only). Provides additional 30 digital station ports (Norstar T-Series and M-Series telephones only). Provides four analog CO line ports. Supports full PRI or T1. Limit 1 PRI/T1 card per system. PARTNER Mode supports the following telephones. · 1400 Series digital telephones. · 9500 Series digital telephones. · Norstar T-Series and M-Series digital telephones. · PARTNER ACS telephones. · PARTNER ACS “Euro” telephones. · Analog “POTS” telephones. The following 1400 Series telephones are supported. The following 9500 Series telephones are supported. Norstar T-Series and M-Series telephones. The following Norstar telephones are supported on PARTNER Mode. T-Series Telephones: T7316E, T7208, T7100, T7000 and the T24KIM. M-Series Telephones: M7324, M7310 and the CAP/KLM Button Module. PARTNER ACS Series 2 telephones. The following PARTNER ACS telephones are supported on PARTNER Mode. 6 Button Display Telephone. 18 Button Display Telephone. 34 Button Display Telephone (up to 4 per system, 2 per ETR card). Call Assist-48 (CA-48) Adjunct. PARTNER ACS “Euro” Series 1 telephones. The following PARTNER ACS Euro telephones are supported on PARTNER Mode. 6 Button non-Display Telephone. 18 Button non-Display Telephone. 34 Button Display Telephone (up to 4 per system). Call Assist-24 (CA-24) Adjunct. Digital Mobility 7400 Wireless. The 3910 Wireless telephone is discontinued, but it is still supported. Analog devices are connected to the system. To one of the analog ports on the Combination Card. To an ETR station port (directly or bridged with a PARTNER ETR telephone). The major features work the same, regardless how they are connected: e. Hold, Conference, Transfer, Call Waiting, Message Waiting, Incoming Caller ID. Analog telephones have access to all dial-code features familiar to PARTNER users: e. To place an outgoing call, the user will dial 9. Analog telephones connected to an ETR module follows programmed Automatic Line Selection. The PARTNER Mode and IP Office Basic Edition Mu-Law can be programmed in the following ways. Telephone User Interface (TUI) from extension 10 or extension 11; and uses the same administration codes as the PARTNER ACS system. Button Programming Features use the same codes as the PARTNER ACS system. TUI programming is an alternate way to do System Administration and Programming on the PARTNER Mode. It is based on the PARTNER ACS TUI, but with improvements. Using TUI System Administration on ETR, 1400 Series, 9500 Series and Norstar sets, the buttons under the display become soft-keys which are used to navigate and change the administration items. There are also shortcut codes which enable the administrator to jump to particular administration items. Graphical User Interface (GUI) PARTNER Mode can be administered using the IP Office Web Manager. The new IP Office Web Manager eliminates the need to have windows operating system as it can run on any device that supports standard browsers. For off line configuration, Upgrades, back-up and restore it is recommended that Manager continues to be used. “Simplified Manager” is a PC GUI application inherent to the IP Office Manager application. Although system administration can be completed via either the TUI or GUI method; some advanced features such as SIP and. PRI/E1 administration requires the Manager application. When you execute Manager, the program searches for any IP500 V2 units running PARTNER Mode on your network and will automatically connect using the default login and password. You are then presented with a “Simplified Manager” Screen. By using the system hyperlinks, you are able to quickly and easily administer the PARTNER Mode system in a short time. Further details can be found in the IP Office Norstar PARTNER Manager documentation guide posted on the Avaya Support website. Extensions 10 and 11 can program other extensions on the system from their telephones. The system provides the majority of the feature set that is ideal for businesses. A listing of the built-in features is detailed below. Feature descriptions can be found on the following pages. TUI Feature Programming Codes (if applicable) are also provided. For more details start on page 33 of the. We can also have a local technician come out. Anywhere in the country. Trouble shooting is not included in the estimate and if applicable is billed separately. You will be billed for actual time and material. Do you have an old non-working processor? Did your processor just get fried in a power surge or a power outage? Telephone Man of America has no endorsement, authorization or licensing rights from Avaya. All items are used from previous end-users and are being resold with no endorsement, authorization or licensing rights from Avaya. The item “Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones” is in sale since Friday, August 16, 2019. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems & PBXs”. The seller is “telephonemanofamerica” and is located in Plant City, Florida. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Antigua and barbuda, Dominica, Bangladesh, Bolivia, Egypt, Gibraltar, Iceland, Jordan, Martinique, Maldives, Nicaragua, Oman, Paraguay, Uruguay.

  • Model: Avaya IP OFFICE BUSINESS PHONE SYSTEM BUNDLE
  • Type: Avaya IP OFFICE BUSINESS PHONE SYSTEM BUNDLE
  • Features: Voicemail
  • MPN: 700476005
  • Brand: Avaya IP OFFICE BUSINESS PHONE SYSTEM BUNDLE

Nortel MICS office phone system package 8 M7310 8 lines

Nortel MICS office phone system package 8 M7310 8 lines


Nortel MICS office phone system package 8 M7310 8 lines


Nortel MICS office phone system package 8 M7310 8 lines


Nortel MICS office phone system package 8 M7310 8 lines


Nortel MICS office phone system package 8 M7310 8 lines


This package includes 8 M7310 office display telephones. Features of this system include music on hold capability, conferencing, call transfer, speed dial, capability to interface with a paging or intercom system, and speakerphone. All products are REFURBISHED to be as close as possible to the factory standard, both in working order and in appearance. This system DOES NOT include Caller ID or Voicemail. Additional phones and system configurations are available, and we are able to customize and tailor a system package specifically to the needs of your small business. The item “Nortel MICS office phone system package 8 M7310 8 lines” is in sale since Thursday, March 21, 2019. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems & PBXs”. The seller is “teleconnectdirect” and is located in Buford, Georgia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Antigua and barbuda, Dominica, Bangladesh, Bolivia, Egypt, Gibraltar, Iceland, Jordan, Martinique, Maldives, Nicaragua, Oman, Paraguay, Uruguay, South africa.

  • Model: MICS T7316 T7316E
  • MPN: Does Not Apply
  • Brand: Nortel

Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines

Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines


Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines


Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines


Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines


Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines


Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines


Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines


Nortel Norstar Plus Compact ICS NT7B65FC-93. Nortel-Norstar CICS A0737352 NA-CICS-DR 2.0 STD-IRAD S/W V10.7 Software. Norstar NT7B56FC-93 LS/DS Trunk Card. Four Phones + receivers. Please note: One of the four phones is missing three buttons. Only pictured items are included. Thanks for looking and good luck! The item “Nortel Norstar Compact ICS CICS, NT7B56FC-93, Bracket, Cover & Software+ 4 lines” is in sale since Tuesday, July 2, 2019. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems & PBXs”. The seller is “cashkingusa” and is located in Mokena, Illinois. This item can be shipped to United States.

  • MPN: NNTMH1009KA9
  • Brand: Nortel

NEC SV8100 PHONE SYSTEM WithCD CP00 VOIP PRTA T1/E1 VM00 110HRS 3x 16DLCA 48 LINES

NEC SV8100 PHONE SYSTEM WithCD CP00 VOIP PRTA T1/E1 VM00 110HRS 3x 16DLCA 48 LINES


NEC SV8100 PHONE SYSTEM WithCD CP00 VOIP PRTA T1/E1 VM00 110HRS 3x 16DLCA 48 LINES


NEC SV8100 PHONE SYSTEM WithCD CP00 VOIP PRTA T1/E1 VM00 110HRS 3x 16DLCA 48 LINES


NEC SV8100 PHONE SYSTEM WithCD CP00 VOIP PRTA T1/E1 VM00 110HRS 3x 16DLCA 48 LINES


NEC SV8100 PHONE SYSTEM WithCD CP00 VOIP PRTA T1/E1 VM00 110HRS 3x 16DLCA 48 LINES



THIS ITEM IS USED. GOOD USED CONDITION, COMES AS SHOWN WITH POWER CORD. IF YOU SHOULD HAPPEN TO HAVE ANY ISSUE WITH YOUR ITEM ONCE RECEIVED. PLEASE CONTACT ME FIRST SO I CAN TRY AND RESOLVE ANY PROBLEM FIRST HAND THANK YOU. The item “NEC SV8100 PHONE SYSTEM WithCD CP00 VOIP PRTA T1/E1 VM00 110HRS 3x 16DLCA 48 LINES” is in sale since Wednesday, May 8, 2019. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems & PBXs”. The seller is “babyers88″ and is located in USA. This item can be shipped to United States.

  • Model: SV8100
  • Type: VoIP System
  • Features: Call Distribution
  • MPN: CHS2U-US
  • Brand: NEC

NEC DSX 40 1090001 DX7NA-40M Main Cabinet 4 Lines X 8 Digital X 2 Analog Sta #B

NEC DSX 40 1090001 DX7NA-40M Main Cabinet 4 Lines X 8 Digital X 2 Analog Sta #B


NEC DSX 40 1090001 DX7NA-40M Main Cabinet 4 Lines X 8 Digital X 2 Analog Sta #B


THANK YOU FOR VISITING. YOU WILL RECEIVE A RESPONSE WITHIN 24 HOURS. 1090001 DX7NA-40M Main Cabinet 4 Lines X 8 Digital X 2 Analog Station. #B Stock – NO SIDE COVER. Thank you for viewing one of our items. We are listing many new items each week. We will provide you with as much information as we can and we guarantee your satisfaction with every item. The item listed is represented to the best of our ability. Any/all defects, scratches, chips, other imperfections will be noted in the item description or a photo of the defect will be provided. Please do all research and ask all questions before purchasing. Failure to keep the packing materials will result the inability to process the claim with the carrier. The item “NEC DSX 40 1090001 DX7NA-40M Main Cabinet 4 Lines X 8 Digital X 2 Analog Sta #B” is in sale since Thursday, December 20, 2018. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems & PBXs”. The seller is “jdltreasures1″ and is located in Boca Raton, Florida. This item can be shipped worldwide.

  • Model: 1090001 DX7NA-40M Main Cabinet 4 Lines X 8 Digital
  • Type: Conventional System
  • Features: Voicemail
  • MPN: 1090001 DX7NA-40M
  • Brand: NEC DSX 40

Panasonic KX-TDA 4 phones & 2 Analogue Lines Phone System GST & Del Inc

Panasonic KX-TDA 4 phones & 2 Analogue Lines Phone System GST & Del Inc


Add to Favourite Sellers. Panasonic KX-TDA Telephone System Package. This system comes with the following components. 1 x Panasonic KX-TDA30 Control Unit. 1 x 2 Port Analogue Line Card KX-TD3183. 1 x Panasonic KX-T7630 Telephones. 3 x Panasonic KX-T7667 Telephones. Please note this package does not include installation but we do have packages including install in our shop. These phones have been professionally refurbished. This process includes new cords and paper & plastic sets. The Phones are then shrink-wrapped and individually boxed. You may have heard the saying you get what you pay for. Well Panasonic really sumise this saying well with the KX-TDA systems. Considered in the trade to be the most reliable around and packed with features that should only be availalbe to large corporate call centre operations the whole range of systems leave the competition floundering. If budget is not an issue we would always make this our system of choice. Automatic Callback Busy (Camp On) for intercom or CO calls when the busy line becomes free the system automatically alerts the user that the busy extension has become free. When that user picks up the line that was busy is automatically dialled providing a convenient timesaving feature for users who want to carry on with work rather than waiting for a busy line to become free. System Speed Dialling up to 1000 system speed dial numbers of up to 32 digits each for all extension users. Up to 8000 can be provided with MEC KX-TDA0105. In addition the KX-T7636, KX-T7633, KX-T7630 phones in the KX-T600 series allow you to scroll through the speed dial list and, with one touch of the speakerphone key, dial the number. Conferencing for users who have lots of conference calls within the same organisation this is a useful facility and provides the ability to hold a conference call with 3 to 8 parties. Account Codes identifies incoming and outgoing external calls for accounting and billing purposes. The account code is linked to the Station Message Detail Recording (SMDR) which can be useful for billing or recording time spent. The system can be programmed to force the use of the account code or not. Incoming Call Distribution the system can be set up so that it is easy for callers to reach the correct destination which is vital for all types of business. The destination can be a specific individual, a group, live attendant, auto attendant, voicemail or a combination of these. Call Forwarding choice of all calls, busy, no answer and busy/no answer. Group calls, internal and external can be forwarded to internal or external numbers. Each call can be forwarded 4 times. Universal Call Distribution evenly distributes incoming calls to users within identified groups. 4 messages can be played in a cycle and a facility created for overflow calls. A user can withdraw from the group temporarily when necessary. VoIP can be used as a networking solution. Compatibility system phones KX-T7636, KX-T7633, KX-T7630, KX-T7625, DSS consoles 12 key KX-T7603, 24 key KXT7640 both compatible with KX-T7636 and KX-T7633 and wireless KX-TD7690, KX-TD7680. BGM – background music jack. CO – line status 2 colour LED, line names, limited duration timer. Specifications – E&M 32, E1 2(60ch), BRI(ISDN2) 32(64ch), PRI(ISDN30) 2(60ch), IP-GW card/ch 2(8ch), DECT Cell stations 16(64 ch) 128 handsets, DECT handsets 128, PC phones unlimited, PC console 10, CCU Power consumption (average) 156W, Dimensions (H x D x W) 390 x 334 x 270, Weight 12kg. Automatic ISDN Setting (BRI). Digital X-DP version 1.1. ARS/LCR, Automatic ISDN Setting (BRI). Calling Line Identification (CLI). Class of service (CSS). Direct In Lines (DIL), Direct Inward Dialling (DIL). External Sensor / Relay Control. Flexible Numbering Plan (5-digit). Host PBX Acces Code. Intercept – routing (busy/DND) or to trunk. MPR, Card / CS Software Download. Groups – paging groups, ring groups, trunk groups, extension groups. Remote Function s- Remote Maintenance / Remote Management/ Remote extension status control through DISA. Time Service – day/night/lunch/break. Mount – rack mountable, wall mountable. The following enhancements are available to provide additional functionality, call management and analysis. CTI – Computer Telephony Integration. This is This is powerful tool as it links your database with the telephone system which enables users to have quick access to customer files when they are on the telephone and monitor customer information to enhance customer relationships as your company grows. Panastat – Monitoring how your telephone system is being used is of enormous value to your business. Panastat call management software can be added to the KX-TDA100 and offers reports daily, weekly, monthly and annually in an easy to read format. IP – IP Extension Card, IP Gateway Card (16 channel). DECT – increase the mobility of the workforce around the premises. Caller ID for SLTs. Text Messaging – to supported DECT and keyphones. Speed Dialling – up to 8000 with the KX-TDA105 MEC card. DISA – Direct Inward System Access using the optional KX-TDA0191 4 channel message card this allows an outside caller to access some system features without operator assistance as if they had an extension on the system. Also offers auto attendant. Calls can be logged according to their destination and quantity. IT Connection – there are several options for linking to network or central office systems. ISDN PRI with QSIG – ISDN Primary Rate Interface KX-TDA0290 offers a more advance digital connection and takes up only one slot. T1 Service – KX-TDA0187 T1 Card provides 24 connections between a location and a central office depending on your line providers rates and the complexity of your requirements. IP – extension card, gateway card (16 channel). Homeworkers / Remote Offices – utilising the Gateway and extender, can access the features of your central communications platform. Hotel – enhanced hotel features. Track Page Views With. Auctiva’s FREE Counter. All our hardware is tested and refurbished in our purpose built Erina warehouse. Telephones have both curly and line cords removed and replaced. The replacement cords we use are 3 meters in length when fully extended and 50cm when coiled. These are the same cords we sell in our cordage listing. The phones are then sanitized and cleaned to look as new as possible. New papers and plastic covers are then added. The phones are then passed through to quality control to make sure our standards are maintained. We then test the phones again before individually shrink wrapping and boxing. Cards and Control units are electronically tested and when possible firmware is upgraded to the latest version. These then come delivered in anti-static bags. For several years we have tweaked our process to obtain as close to perfection as humanly possible. This has helped us grow rapidly in to a market leader in the refurbished telecoms market. The photos contained on this site are indicative of the refurbishment process. Our phones are graded as follows. A Grade : Very good condition. B Grade : Good working order with some marks or discoloration. C Grade: Good Working order but poor cosmetics and possible missing parts. Unless stated we do not include power supplies with any of our phones. This is because most phones now support POE (Power Over Ethernet). We specialize in Business Telephone Systems and Hosted IP Telephone Systems. The majority of phones we sell will not work on a standard PSTN line. If you are unsure of your line type. The item “Panasonic KX-TDA 4 phones & 2 Analogue Lines Phone System GST & Del Inc” is in sale since Tuesday, August 28, 2012. This item is in the category “Business\Telephone Systems\Phone Systems, PBXs”. The seller is “thetelecomshop-australia” and is located in Terrigal. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

  • Brand: Panasonic
  • Model: KX-TDA
  • MPN: KX-TDA 4

Commander Connect Phone System 4 Lines 5 Phones & DECT Cordless Inc GST & Del

Commander Connect Phone System 4 Lines 5 Phones & DECT Cordless Inc GST & Del


Commander Connect Phone System 4 Lines 5 Phones & DECT Cordless Inc GST & Del


Commander Connect Phone System 4 Lines 5 Phones & DECT Cordless Inc GST & Del


Commander Connect Phone System 4 Lines 5 Phones & DECT Cordless Inc GST & Del


Add to Favourite Sellers. Commander Connect Telephone System Package. Installation is Available Australia Wide. This system comes with the following components. 1 x Commander Connect CCU. 4 x Commander Connect 8 Button Display Phones. 2 x Analogue Cards. If you have chosen a package with install, this is based on using existing telephone cabling. System training will be given on the day of install. These phones have been professionally refurbished. This process includes new cords and paper & plastic sets. The Phones are then shrink-wrapped and individually boxed. The Commander Connect Telephone System is an ideal choice for the small to medium business. It comes configured as 0×8 and, with the addition of ports modules, it can be expanded to up to 40 extensions and 6 lines of ISDN2 or 8 lines of analogue and it will even allow you to use up to 15 lines of ISDN30. The system is compatible with a great range of highly featured phones. The 8 Button and 16 Button phones both offer full key and lamp facility as well as a fully menu driven feature list. There are also a lower priced range of phones available. The MK1 and MK2 feature phones will both also work very well with the system but will limit your access to some of the systems features. We also stock a really good range of simple phones that integrate well with the system. If you have a tight budget these are well worth considering as it will significantly reduce the cost of your investment. Three Voicemail Modules are available for the Connect Telephone System, 2 port 2 hour recording, 4 port 4 hour recording and an 8 port 20 hour module. The 8 port also includes an option for adhoc call recording. This module also has the Auto Attendant feature on it and this will allow you to route your calls straight to the correct extension. You can customise this with your own voice. All of the Voicemail Modules will also integrate with the handsets via both a broken tone and a message light to indicate a new message. With the addition of a Broadband Module you can add 2 VoIP phones to the system and if you need more than 2 then a Broadband + module, which will allow you to connect up to 12 remote IP extensions, is needed. For the custom touch you can have your own music played to your customers. To do this all you need is an internal Music on Hold Module and a music source. If you dont want this feature then you can use hold music which is built in to the system. With the addition of the Hospitality Software this system is also ideal for use in small to medium sized guest houses or hotels. A serial printer or connection to a PC with hyper terminal configured would be needed along with a Programming Lead. This system is quite simple to install and relatively simple to program. We have an in house support team as well as bespoke maintenance packages that you will find useful. See our Installation and Maintenance page for more information. The only negative point the Commander Connect System has is that the Programming Lead, which is available separately, requires a computer to have a serial port there are lots of serial to USB converters about but most of them dont work. We have found that the Belkin adaptor works very well. Top Tips if youre running windows 7, set the compatibility mode when you install the driver to XP service pack 3. If the ringer does not work when installing SLT phones, change the extension power settings. If you see a line key illuminated for around 45 seconds after a call is terminated this is probably because Guarded Clear is enabled in default for PSTN lines. The remedy is to go into programming, select lines, select PSTN lines and untick Guarded Clear. If the date and time on your system from those on your featurephones this will be because calls were in progress on the featurephones when the system time and date were changed and the changes wont show on the telephones until the calls have ended. To check how to programme the system, refer to the Owners Manual and the details are in the section Additional Call Features, Displaying Caller Numbers. You can only use this feature if you already provide an external music source such as a CD player for music-on-hold. If the feature is turned on and no external music source is provided the speakers may make a low level noise. To stop this, select the Program key on the featurephone, scroll down and select Background music, and select off. Max 12 Loop calling lines. Up to 40 Feature phones, up to 40 standard 2-wire apparatus, max 8 V16 XP console additional. 67 ohms (0.4 km) 4-wire Feature Phones, 336 ohms (2 km) Standard Telephone. 2 up to a system max. REN of 40 with a maximum of 16 extensions ringing for a single call. May be connected to any extension on the system. Standard 4 wire twisted pair 0.5 mm2. Central Control Unit (CCU) 008. HxWxD: 390mm x 295mm x 160mm. Maximum Capacity System 15+40 CCU. HxWxD: 390mm x 595mm x 160mm. Customers should allow for growth of system to maximum size when positioning CCU on the wall. Battery Back-up (where fitted). 12 V/7.2 AH. Standard 2-wire Telephone Signalling. DTMF with Timed Break recall. 40 Individual User Mailboxes. 10 Phantom Voice Boxes. 1 System Mailbox (answering machine). 2 Ports: 2 Hours Messaging Capacity. 8 Ports: 20 Hours Messaging Capacity. Maximum Message Length – defaults at 1 minute but is programmable up to 5 minutes. Internal & External calls, music or tone. Install is based on using existing telephone cabling. System trainning will be given on the day of install. All our hardware is tested and refurbished in our purpose built Erina warehouse. Telephones have both curly and line cords removed and replaced. The replacement cords we use are 3 meters in length when fully extended and 50cm when coiled. These are the same cords we sell in our cordage listing. The phones are then sanitized and cleaned to look as new as possible. New papers and plastic covers are then added. The phones are then passed through to quality control to make sure our standards are maintained. We then test the phones again before individually shrink wrapping and boxing. Cards and Control units are electronically tested and when possible firmware is upgraded to the latest version. These then come delivered in anti-static bags. For several years we have tweaked our process to obtain as close to perfection as humanly possible. This has helped us grow rapidly in to a market leader in the refurbished telecoms market. The photos contained on this site are indicative of the refurbishment process. Our phones are graded as follows. A Grade : Very good condition. B Grade : Good working order with some marks or discoloration. C Grade: Good Working order but poor cosmetics and possible missing parts. Unless stated we do not include power supplies with any of our phones. This is because most phones now support POE (Power Over Ethernet). We specialize in Business Telephone Systems and Hosted IP Telephone Systems. The majority of phones we sell will not work on a standard PSTN line. If you are unsure of your line type. You’ll need Skype Credit. The item “Commander Connect Phone System 4 Lines 5 Phones & DECT Cordless Inc GST & Del” is in sale since Friday, December 2, 2016. This item is in the category “Business\Telephone Systems\Phone Systems, PBXs”. The seller is “thetelecomshop-australia” and is located in Terrigal. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

  • Brand: Commander
  • Colour: Black
  • Features: Auto Attendant
  • MPN: TTSCCSPAK8
  • Model: Connect
  • Product Type: Business Telephones

Nortel Norstar Compact ICS CICS 7.3 SW KSU with 4 lines caller ID

Nortel Norstar Compact ICS CICS 7.3 SW KSU with 4 lines caller ID


Nortel Norstar Compact ICS CICS 7.3 SW KSU with 4 lines caller ID


Nortel Norstar Compact ICS CICS 7.3 SW KSU with 4 lines caller ID. Carded for 8 Lines (including 4 Caller ID) and 16 telephones. Tested by certified Nortel technicians and confirmed in full working condition. The item “Nortel Norstar Compact ICS CICS 7.3 SW KSU with 4 lines caller ID” is in sale since Wednesday, December 26, 2018. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems & PBXs”. The seller is “businesstelecom” and is located in Dallas, Texas. This item can be shipped to United States.

  • Brand: Nortel
  • Model: Compact ICS
  • MPN: NT7B56FA-93

Panasonic KX-TDA 24 phones & 8 Analogue Lines Phone System GST & Del Inc

Panasonic KX-TDA 24 phones & 8 Analogue Lines Phone System GST & Del Inc


Add to Favourite Sellers. Panasonic KX-TDA Telephone System Package. This system comes with the following components. 1 x Panasonic KX-TDA30 Control Unit. 2 x 4 Port Analogue Line Card. 2 x 8 Port Module Card. 1 x Panasonic KX-T7630 Telephones. 23 x Panasonic KX-T7667 Telephones. Please note this package does not include installation but we do have packages including install in our shop. These phones have been professionally refurbished. This process includes new cords and paper & plastic sets. The Phones are then shrink-wrapped and individually boxed. You may have heard the saying you get what you pay for. Well Panasonic really sumise this saying well with the KX-TDA systems. Considered in the trade to be the most reliable around and packed with features that should only be availalbe to large corporate call centre operations the whole range of systems leave the competition floundering. If budget is not an issue we would always make this our system of choice. Automatic Callback Busy (Camp On) for intercom or CO calls when the busy line becomes free the system automatically alerts the user that the busy extension has become free. When that user picks up the line that was busy is automatically dialled providing a convenient timesaving feature for users who want to carry on with work rather than waiting for a busy line to become free. System Speed Dialling up to 1000 system speed dial numbers of up to 32 digits each for all extension users. Up to 8000 can be provided with MEC KX-TDA0105. In addition the KX-T7636, KX-T7633, KX-T7630 phones in the KX-T600 series allow you to scroll through the speed dial list and, with one touch of the speakerphone key, dial the number. Conferencing for users who have lots of conference calls within the same organisation this is a useful facility and provides the ability to hold a conference call with 3 to 8 parties. Account Codes identifies incoming and outgoing external calls for accounting and billing purposes. The account code is linked to the Station Message Detail Recording (SMDR) which can be useful for billing or recording time spent. The system can be programmed to force the use of the account code or not. Incoming Call Distribution the system can be set up so that it is easy for callers to reach the correct destination which is vital for all types of business. The destination can be a specific individual, a group, live attendant, auto attendant, voicemail or a combination of these. Call Forwarding choice of all calls, busy, no answer and busy/no answer. Group calls, internal and external can be forwarded to internal or external numbers. Each call can be forwarded 4 times. Universal Call Distribution evenly distributes incoming calls to users within identified groups. 4 messages can be played in a cycle and a facility created for overflow calls. A user can withdraw from the group temporarily when necessary. VoIP can be used as a networking solution. Compatibility system phones KX-T7636, KX-T7633, KX-T7630, KX-T7625, DSS consoles 12 key KX-T7603, 24 key KXT7640 both compatible with KX-T7636 and KX-T7633 and wireless KX-TD7690, KX-TD7680. BGM – background music jack. CO – line status 2 colour LED, line names, limited duration timer. Specifications – E&M 32, E1 2(60ch), BRI(ISDN2) 32(64ch), PRI(ISDN30) 2(60ch), IP-GW card/ch 2(8ch), DECT Cell stations 16(64 ch) 128 handsets, DECT handsets 128, PC phones unlimited, PC console 10, CCU Power consumption (average) 156W, Dimensions (H x D x W) 390 x 334 x 270, Weight 12kg. Automatic ISDN Setting (BRI). Digital X-DP version 1.1. ARS/LCR, Automatic ISDN Setting (BRI). Calling Line Identification (CLI). Class of service (CSS). Direct In Lines (DIL), Direct Inward Dialling (DIL). External Sensor / Relay Control. Flexible Numbering Plan (5-digit). Host PBX Acces Code. Intercept – routing (busy/DND) or to trunk. MPR, Card / CS Software Download. Groups – paging groups, ring groups, trunk groups, extension groups. Remote Function s- Remote Maintenance / Remote Management/ Remote extension status control through DISA. Time Service – day/night/lunch/break. Mount – rack mountable, wall mountable. The following enhancements are available to provide additional functionality, call management and analysis. CTI – Computer Telephony Integration. This is This is powerful tool as it links your database with the telephone system which enables users to have quick access to customer files when they are on the telephone and monitor customer information to enhance customer relationships as your company grows. Panastat – Monitoring how your telephone system is being used is of enormous value to your business. Panastat call management software can be added to the KX-TDA100 and offers reports daily, weekly, monthly and annually in an easy to read format. IP – IP Extension Card, IP Gateway Card (16 channel). DECT – increase the mobility of the workforce around the premises. Caller ID for SLTs. Text Messaging – to supported DECT and keyphones. Speed Dialling – up to 8000 with the KX-TDA105 MEC card. DISA – Direct Inward System Access using the optional KX-TDA0191 4 channel message card this allows an outside caller to access some system features without operator assistance as if they had an extension on the system. Also offers auto attendant. Calls can be logged according to their destination and quantity. IT Connection – there are several options for linking to network or central office systems. ISDN PRI with QSIG – ISDN Primary Rate Interface KX-TDA0290 offers a more advance digital connection and takes up only one slot. T1 Service – KX-TDA0187 T1 Card provides 24 connections between a location and a central office depending on your line providers rates and the complexity of your requirements. IP – extension card, gateway card (16 channel). Homeworkers / Remote Offices – utilising the Gateway and extender, can access the features of your central communications platform. Hotel – enhanced hotel features. Track Page Views With. Auctiva’s FREE Counter. All our hardware is tested and refurbished in our purpose built Erina warehouse. Telephones have both curly and line cords removed and replaced. The replacement cords we use are 3 meters in length when fully extended and 50cm when coiled. These are the same cords we sell in our cordage listing. The phones are then sanitized and cleaned to look as new as possible. New papers and plastic covers are then added. The phones are then passed through to quality control to make sure our standards are maintained. We then test the phones again before individually shrink wrapping and boxing. Cards and Control units are electronically tested and when possible firmware is upgraded to the latest version. These then come delivered in anti-static bags. For several years we have tweaked our process to obtain as close to perfection as humanly possible. This has helped us grow rapidly in to a market leader in the refurbished telecoms market. The photos contained on this site are indicative of the refurbishment process. Our phones are graded as follows. A Grade : Very good condition. B Grade : Good working order with some marks or discoloration. C Grade: Good Working order but poor cosmetics and possible missing parts. Unless stated we do not include power supplies with any of our phones. This is because most phones now support POE (Power Over Ethernet). We specialize in Business Telephone Systems and Hosted IP Telephone Systems. The majority of phones we sell will not work on a standard PSTN line. If you are unsure of your line type. The item “Panasonic KX-TDA 24 phones & 8 Analogue Lines Phone System GST & Del Inc” is in sale since Tuesday, August 28, 2012. This item is in the category “Business\Telephone Systems\Phone Systems, PBXs”. The seller is “thetelecomshop-australia” and is located in Terrigal. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

  • Brand: Panasonic
  • Model: KX-TDA
  • MPN: KX-TDA

Panasonic Advanced Hybrid System KSU KX-TA624-4 In Factory Box 3 lines 8 Station

Panasonic Advanced Hybrid System KSU KX-TA624-4 In Factory Box 3 lines 8 Station


Used from county surplus. Look at description for details for more pictures. Due to my holiday schedule. This Listing Is For A New, Open Box Panasonic KXTA624-4 Telephone System. Included is the KSU, Power Cord & Manual as shown. F you have any questions please ask! Please contact me if the item has been listed in error or not as described. I work an 8-5 job daily. This would be impossible to do since I’m at work about 20 minutes from home. That the best I can do. Please don’t hesitate to contact me with any questions or problems with your item. I will make sure you are happy with your item and our response. If you receive an item that is not as described, I will resolve the problem as quickly as possible at No Cost To You. I will work with you to arrange for repair or replacement if possible. No Return On As-Is Sales. You can return the item to me. The time transit time to you depends on the distance from our location to you. The price is calculated based on your zip code, and the weight and size of the item. If additional time is required, please contact me. Auctiva offers Free Image Hosting and Editing. Track Page Views With. Auctiva’s FREE Counter. The item “Panasonic Advanced Hybrid System KSU KX-TA624-4 In Factory Box 3 lines 8 Station” is in sale since Thursday, November 1, 2018. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems & PBXs”. The seller is “here2sell4u” and is located in Connersville, Indiana. This item can be shipped to United States.

  • Brand: Panasonic
  • MPN: XTA624-4
  • Country/Region of Manufacture: United Kingdom