Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones

Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones


Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones


Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones


Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones


Part numbers associated with this listing: 700476005 700479710. And will be set to release version 8.1(95). This system is in Basic or Partner Mode so no key codes are needed. I have taken the time to make sure that release level on the SD card and the 500 V2 Processor initial boot release limitation levels match up and are at least version 8.1 so there is no key code conflict showing up on the system when you connect phones. That each one provides up to 4 analog lines, up to 6 digital phones, up to 2 analog phones and up to 10 VCM channels. All you need to do is add phones. Avaya IP Office Digital Phones. Call Kelly at at your convenience. Scroll down under the pictures and see my store section under. Avaya IP Office Bundles. See more information below. 1 Avaya IP500 V2 Control Unit (700476005). The Avaya IP500 V2 Control Unit is the newest control unit for the Avaya IP Office system. Avaya IP500 V2 Features. 4 Base Card Slots. Also accommodates the Legacy Card Carrier. Supports IP500 trunk daughter cards connected to IP500 Base Cards. Also supports IP400 trunk cards using the Legacy Card Carrier. 2 SD Card Slots. Supports system SD card (required) and optional SD card. Maximum 30 usable for Voicemail Pro/TAPI WAV connection sessions. Support for up to 12 Expansion Modules. In addition to the 8 integrate expansion ports, can add up to 4 additional external expansion modules using 4-Port Expansion base card. Full duplex 10/100 Mbps; managed layer 3 Ethernet switch. Music on-hold, DTE port, external relay switch for door entry controls, integral WAN port. 1 Avaya IP500 V2 System SD Card Mu Law 700479710. IP500 V2 System SD Card Features. Acts as feature key to validate system features. Provides storage for Essential Edition Messaging. Can be preloaded with release, configuration, and feature activations to enable faster implementation. Essential Edition Messaging Features. Included with IP500 V2 system; no license required. Up to 15 hours message storage; Configurable recording time. Help menus, greetings, and mailbox navigation. Configurable system-wide short code for voicemail collect. 40 independent Auto Attendants with 3 time profiles per Auto Attendant; Up to 12 menu items per Auto Attendant with automatic time-out to fallback number. Auto attendant supports Dial by Name and direct Dial by Number. Visual Voice – Access and control of voicemail via the digital or IP terminal display (telephone model dependent). Reply to a message to either an internal or external number (if Caller ID available). Support for hunt group announcements. Fax option for rerouting fax calls via the auto-attendant menu. Support for Fast Forward (#), Rewind , Skip Message (9) and Call Sender when listening to messages. Compatible with IP500 V2 Control Unit (IPO R6 and higher). 2 Avaya IP500 Combination Card w/4 Analog Trunks V2 700504556. The Avaya IP500 Combination Card V2 provides 4 analog trunk ports, 6 digital station ports, 2 analog station ports, and 10 voice compression channels for your IP500 V2 system. Avaya IP500 V2 Combination Card Features. 4 analog trunk ports (9-12) via a pre-installed IP500 Analog Trunk 4 daughter card. 6 digital station ports (1-6). 2 analog station ports (7-8). Maximum 2 per IP500 V2 control unit. Enhancements for IP500 Combination Card V2: Impedance matching to trunk characteristics, improved echo reduction, and reduction of occasional noise. Compatible only with IP500 V2 control unit running IPO 8.1 Feature Pack 1 (8.1.63) or higher. Digital station (DS) ports compatible with Avaya 1400, 2400, 5400, 6400, and 9500 series digital telephones See below for more details for compatible phones in Basic/Partner Mode. For DS ports only the 1400 and 9500 series phones are functional in Basic/Partner Mode. More on Basic Edition/Partner Mode below. (16 August 2012). I have added, changed and or removed some of the content. To see the full version and other installation documents call me. IP Office Basic Edition PARTNER® Mode. The IP Office Basic Edition Partner Mode continues the evolution of communications systems for small businesses. PARTNER Mode is designed to work directly out of the box without any programming or administration, allowing users to immediately make and place calls via analog trunks. PARTNER Mode provides the end user a similar desktop experience as the PARTNER ACS: e. 2 dedicated intercom buttons, key system functionality, Caller ID, etc. This helps minimize training requirements and provides the end user with the same comfort level they have come to expect with the PARTNER ACS system. PARTNER Mode provides enhanced features such as Visual Voice, Remote Call Forwarding, 64-party Conferencing, SIP Trunking, Full PRI/T1 and more. PARTNER Mode provides the same 2-digit extension numbering plan as PARTNER ACS (default), and now supports a 3-digit flexible numbering plan (extensions 100 599). PARTNER Mode supports all current and “Euro” versions of PARTNER ACS telephones, the 1400 Series digital telephones, the current 3920 and 3910 wireless products, as well as most analog devices (fax, wireless headsets, and analog telephones). The original MLS Series telephones and older wireless telephones are not supported. PARTNER Mode also supports a new line of Avaya digital telephones the 9500 Series telephones, and supports the Nortel T-Series and M-Series digital telephones. The Embedded Voicemail offers a variable number of hours of storage. · 2-ports = 15 hours of storage. · 4-ports = 20 hours of storage. · 6-ports = 25 hours of storage. PARTNER Mode supports larger telephone and trunk capacity as follows (may not be attained simultaneously). · Up to 100 digital telephones (1400 Series, 9500 Series, T-series and M-Series telephones). · Up to 100 analog telephones. · Up to 18 PARTNER ETR telephones (additional non ETR telephones can be added total to reach system capacity). · Up to 32 analog CO lines. · 1 PRI/T1 (24 lines). · Up to 20 SIP lines. · can support up to 72 trunks, but not simultaneously. IP Office Basic Edition Mu-Law. When the IP500 V2 containing a IP Office Mu-Law SD card is first started, it will boot-up as “Basic Edition”, which has the same look and feel as PARTNER Mode, supporting out of the box operations, two intercom buttons, key system functionality, voice mailboxes on all telephones, TUI programming support, etc. “Basic Edition” makes starting and using the system quick and easy. Users who need full IP Office Essential Edition functionality (or to operate in IP Office Mode) can apply an SD card with a Key Code for Essential Edition and the use Manager to change mode from “Basic Edition” to “Essential Edition or IP Office Mode”. Once the system reboots, it re-starts as Essential Edition or IP Office Mode. System programming is accomplished in two ways. (TUI) from extension 10 or extension 11; and uses the same administration codes as the PARTNER ACS system. (GUI) PARTNER Mode provides a “Simplified Manager” mode in the IP Office Manager software; allowing you to program the system in less than 30 minutes. PARTNER Mode runs on the IP500 V2 control unit. A PARTNER Mode SD card or IP Office Mu-Law SD card is required and is installed in the rear of the control unit, providing the ability to have advanced features with the key codes to reveal or activate the features. The system will boot up in PARTNER mode or Quick Mode. An optional SD card may be installed in the optional SD card slot, providing redundant backup and system upgrade capabilities. The front of the IP500 V2 Control Unit has 4 expansion bays, which supports the following system modules. Analog Trunks (Max 2 per system). The Combination Card provides 6 digital station (DS) ports (Ports 1-6); 2 analog station ports (Ports 7-8); 4 CO Line ports (Ports 9-12) and 10 Voice Compression Channels. (Max 3 per system). The ETR6 Card provides 6 ETR (PARTNER ACS telephone) station ports (Ports 1-6); and supports (1) of the following optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 7-8 become Power Failure Transfer ports, and ports 9-12 provide 4 additional CO Line Ports. Compatible only with PARTNER Mode and Mu-Law SD cards with Basic Edition, in North America market only. The DS8 Card provides eight digital station ports (Ports 1-8); and supports (1) of the following optional trunk cards: ATM4 or PRI/T1. When an ATM4 is added, ports 9-12 provide 4 additional CO Line Ports. This card supports only the 1400 and 9500 Series telephones. (Max 4 per system). The TCM8 Card provides eight digital station ports (Ports 1-8); and supports (1) of the following optional trunk cards: ATM4 or PRI/T1. This card supports only Norstar® T-Series and M-Series telephones. PARTNER Mode supports following expansion modules. Provides additional 16 digital station ports (1400 and 9500 Series telephones only). Provides additional 16 digital station ports (Norstar T-Series and M-Series telephones only). ATM16 (limit 1 per system). Provides additional 16 analog CO lines. Provides additional 16 analog stations. Provides additional 30 analog stations. Provides additional 30 digital station ports (1400 and 9500 Series telephones only). Provides additional 30 digital station ports (Norstar T-Series and M-Series telephones only). Provides four analog CO line ports. Supports full PRI or T1. Limit 1 PRI/T1 card per system. PARTNER Mode supports the following telephones. · 1400 Series digital telephones. · 9500 Series digital telephones. · Norstar T-Series and M-Series digital telephones. · PARTNER ACS telephones. · PARTNER ACS “Euro” telephones. · Analog “POTS” telephones. The following 1400 Series telephones are supported. The following 9500 Series telephones are supported. Norstar T-Series and M-Series telephones. The following Norstar telephones are supported on PARTNER Mode. T-Series Telephones: T7316E, T7208, T7100, T7000 and the T24KIM. M-Series Telephones: M7324, M7310 and the CAP/KLM Button Module. PARTNER ACS Series 2 telephones. The following PARTNER ACS telephones are supported on PARTNER Mode. 6 Button Display Telephone. 18 Button Display Telephone. 34 Button Display Telephone (up to 4 per system, 2 per ETR card). Call Assist-48 (CA-48) Adjunct. PARTNER ACS “Euro” Series 1 telephones. The following PARTNER ACS Euro telephones are supported on PARTNER Mode. 6 Button non-Display Telephone. 18 Button non-Display Telephone. 34 Button Display Telephone (up to 4 per system). Call Assist-24 (CA-24) Adjunct. Digital Mobility 7400 Wireless. The 3910 Wireless telephone is discontinued, but it is still supported. Analog devices are connected to the system. To one of the analog ports on the Combination Card. To an ETR station port (directly or bridged with a PARTNER ETR telephone). The major features work the same, regardless how they are connected: e. Hold, Conference, Transfer, Call Waiting, Message Waiting, Incoming Caller ID. Analog telephones have access to all dial-code features familiar to PARTNER users: e. To place an outgoing call, the user will dial 9. Analog telephones connected to an ETR module follows programmed Automatic Line Selection. The PARTNER Mode and IP Office Basic Edition Mu-Law can be programmed in the following ways. Telephone User Interface (TUI) from extension 10 or extension 11; and uses the same administration codes as the PARTNER ACS system. Button Programming Features use the same codes as the PARTNER ACS system. TUI programming is an alternate way to do System Administration and Programming on the PARTNER Mode. It is based on the PARTNER ACS TUI, but with improvements. Using TUI System Administration on ETR, 1400 Series, 9500 Series and Norstar sets, the buttons under the display become soft-keys which are used to navigate and change the administration items. There are also shortcut codes which enable the administrator to jump to particular administration items. Graphical User Interface (GUI) PARTNER Mode can be administered using the IP Office Web Manager. The new IP Office Web Manager eliminates the need to have windows operating system as it can run on any device that supports standard browsers. For off line configuration, Upgrades, back-up and restore it is recommended that Manager continues to be used. “Simplified Manager” is a PC GUI application inherent to the IP Office Manager application. Although system administration can be completed via either the TUI or GUI method; some advanced features such as SIP and. PRI/E1 administration requires the Manager application. When you execute Manager, the program searches for any IP500 V2 units running PARTNER Mode on your network and will automatically connect using the default login and password. You are then presented with a “Simplified Manager” Screen. By using the system hyperlinks, you are able to quickly and easily administer the PARTNER Mode system in a short time. Further details can be found in the IP Office Norstar PARTNER Manager documentation guide posted on the Avaya Support website. Extensions 10 and 11 can program other extensions on the system from their telephones. The system provides the majority of the feature set that is ideal for businesses. A listing of the built-in features is detailed below. Feature descriptions can be found on the following pages. TUI Feature Programming Codes (if applicable) are also provided. For more details start on page 33 of the. We can also have a local technician come out. Anywhere in the country. Trouble shooting is not included in the estimate and if applicable is billed separately. You will be billed for actual time and material. Do you have an old non-working processor? Did your processor just get fried in a power surge or a power outage? Telephone Man of America has no endorsement, authorization or licensing rights from Avaya. All items are used from previous end-users and are being resold with no endorsement, authorization or licensing rights from Avaya. The item “Avaya IP Office 500 V2 Phone System R 8.1 700476005 Basic Mode 8 lines 12 Phones” is in sale since Friday, August 16, 2019. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems & PBXs”. The seller is “telephonemanofamerica” and is located in Plant City, Florida. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Antigua and barbuda, Dominica, Bangladesh, Bolivia, Egypt, Gibraltar, Iceland, Jordan, Martinique, Maldives, Nicaragua, Oman, Paraguay, Uruguay.

  • Model: Avaya IP OFFICE BUSINESS PHONE SYSTEM BUNDLE
  • Type: Avaya IP OFFICE BUSINESS PHONE SYSTEM BUNDLE
  • Features: Voicemail
  • MPN: 700476005
  • Brand: Avaya IP OFFICE BUSINESS PHONE SYSTEM BUNDLE
Be Sociable, Share!

Comments are closed.