Unlocked Linksys SPA9000 + SPA3000 IP PBX IPPBX Phone System Gateway PSTN

Unlocked Linksys SPA9000 + SPA3000 IP PBX IPPBX Phone System Gateway PSTN


Unlocked Linksys SPA9000 + SPA3000 IP PBX IPPBX Phone System Gateway PSTN


Unlocked Linksys SPA9000 + SPA3000 IP PBX IPPBX Phone System Gateway PSTN


Unlocked Linksys SPA9000 + SPA3000 IP PBX IPPBX Phone System Gateway PSTN


Unlocked Linksys SPA9000 + SPA3000 IP PBX IPPBX Phone System Gateway PSTN


Unlocked Linksys SPA9000 + SPA3000 IP PBX IPPBX Phone System Gateway PSTN


Ip pbx system with high-end features. Works with most internet telephone service providers. The spa9000 marries the rich feature set of legacy pbx telephone systems with the convenience and cost advantages of internet telephony. It has common key system features such as an auto attendant, shared line appearances, three way call conferencing, music on hold, “follow me” calling, and many more. The spa9000 is so easy to configure that a fully working system can be setup up in minutes. The web server has multiple levels of password protected access to user and service level features. Service level settings may be locked by the internet telephone service provider to ensure they are not. The service provider can remotely update the software and. Settings through a secure encrypted connection. With it’s integrated router, the spa9000 can be either connected directly to the internet connection, or connected indirectly through another router. The spa9000 has separate wan and local network ethernet ports. The wan connection can be connect through dhcp, a fixed ip address, or through dhcp. The lan port can assign ip addresses to ip telephones and computers using nat and dhcp. While the spa9000 will work with any sip compatible ip telephone, it is the ideal host for linksys business telephones, such as the spa941, spa942, and spa962. With its two fxs ports, the spa9000 can support traditional analog devices such as telephones, answering machines, fax machines, and media adapters. Additional features of the cisco spa9000 voice system include. High-end features comparable to voice services traditionally found in large businesses. Multiple levels of password-protected access. The ability for an internet telephone service provider to remotely update software and settings. Support for advanced features like shared line appearances, hunt groups, call transfer, call parking, and group paging. 1 x rj-45 10/100base-tx lan. 1 x rj-45 10/100base-tx wan. 2 x rj-11 fxs. Connectivity media: twisted pair 10/100base-tx. Vlan tagging – 802.1p/q. Qos – voice packet prioritization over other packet types. Password protected system reset to factory default. Password protected admin and user access authority. Https with factory installed client certificate. Http digest – encrypted authentication via md5 (rfc 1321). Up to 256-bit aes encryption. 5 v dc device. 100 v ac to 240 v ac power supply. Dimensions: 10.11cm height x 10.11cm width x 2.79cm depth. Linksys spa9000 voip gateway. 1 x 5 volt power adapter. 1 x rj45 ethernet cable. 1 x quick installation. Sip application server, proxy, registrar and location server (rfc3261). Multiple service provider lines / sip account support (4). Shared line appearance (sla). Configurable aa answer delay. Interactive voice response (ivr). Automatic call distribution (acd). Corporate directory with automatic update. Music / information via streaming audio server. Integrated media proxy or direct rtp routing to itsp. Differentiated services (diffserv) / type of service (tos) support. Sip compatible ip telephone: spa901, spa921, spa922, spa941, and spa942. X1- 5 volt power adapter. X1- rj45 ethernet cable. X1- quick installation guide. Micro-density pstn gateway + ata combo solution. The spa-3000 continues to deliver on sipura technologys mission to provide market leading, best-in-class voip end points providing freedom and opportunity to service providers and end users. The spa-3000 features voip adapter functionality found in the spa-2000 and spa-1000/1 with the additional benefit of an integral connection for legacy telephone network hop-on, hop-off applications. The advanced authentication and call routing intel-ligence programmed into the spa-3000 will connect the caller via the internet to the far end destination with security and ease. If power and/or ip network connectivity is lost to the unit or the voip service is down, calls can be sent to a traditional carrier via the fxo interface. Voip to pstn (usa) service call origination and termination. Pstn (usa) to voip service call origination and termination. Single or dual stage dialing. Service authentication via pin, digest, caller id (bellcore type 1). Per call authentication and associated routing. Least cost routing support. Terminating impedance agnostic – 8 configurable settings. Call waiting, cancel call waiting. Caller id detection (bellcore type 1). Caller id with name/number (multinational varients) display. Call waiting caller id with name/number. Call forwarding to pstn or voip service: no answer/busy/all. Three-way conference calling with local mixing. Message waiting indication – visual and tone based. Call return and call back on busy. Call blocking with toll restriction. Hot line and warm line calling. Speed dialing of 8 numbers/addresses. Forward calls to voip service – selective, authenticated, all. Forward calls to pstn service – selective, authenticated, all. Pstn line sharing with multiple extensions. Automatic pstn fallback (loss of power or ip service to unit – with quiescence to normal operations). Advanced inbound and outbound call routing. Single stage and two stage dialing. Independent configurable dial plans – up to 8. Voip to pstn authentication and routing. Voip to pstn gateway enable/disable. Voip caller auth method (none, pin, http digest). Voip pin max retry setting. One stage dialing enable/disable. Voip caller id pattern matching. Voip access allowed caller list (no further authentication). Voip caller pin and associated dial plan. Pstn to voip authentication and features. Pstn to voip gateway enable/disable. Caller auth method: none, pin, caller id. Ring through to fxs enable/disable. Ring through tone – configurable. Caller id (bellcore 1) for voip service access. Pin max retry settings. Access allowed caller list (no further authentication). Caller pin and associated dial plan. Least cost routing (via outbound voip – line1 dial plan). Voip answer delay timer. Pstn answer delay timer. Voip pin digit time-out timer. Pstn pin digit time-out timer. Pstn-to-voip call max dur timer. Voip-to pstn call max dur timer. Pstn ring through delay timer. Pstn dialing delay timer. Voip dig refresh interval timer. Pstn ring time-out timer. Cpc (removal of tip/ring voltage momentarily). Long silence (confugrable time setting). Fxo port impedance – configurable to 16 settings. Ring frequency – configurable. Spa to pstn and pstn to spa gain settings. Ring frequency – maximum setting. Ring validation time setting. Tip/ring voltage adjustment setting. Ring indication delay setting. Operational loop current minimum value. Fcc (part 15 class b and part 68) , ce , ices-003. Quick-start installation and configuration guide. Administration guide – service providers only. Provisioning guide – service providers only. 1 – 5v power adapter. 1 – rj45 ethernet cable. 1 – rj11 telephone cable. X 3.75 in (102.87 x 27.94 x 95.25 mm) w x h x d. 2.15 lb (0.975 kg). Mac address (ieee 802.3). Ipv4 – internet protocol v4 (rfc 791) upgradeable to v6 (rfc 1883). Arp – address resolution protocol. Dns – a record (rfc 1706), srv record (rfc 2782). Dhcp client – dynamic host configuration protocol (rfc 2131). Icmp – internet control message protocol (rfc792). Tcp – transmission control protocol (rfc793). Udp – user datagram protocol (rfc768). Rtp – real time protocol (rfc 1889) (rfc 1890). Rtcp – real time control protocol (rfc 1889). Diffserv (rfc 2475), type of service – tos (rfc 791/1349). Sntp – simple network time protocol (rfc 2030). Sipv2: session initiation protocol v2 (rfc 3261, 3262, 3263, 3264). Sip proxy redundancy – dynamic via dns srv, a records. Re-registration with primary sip proxy server. Sip support in network address translation networks – nat incl. Secure (encrypted) calling via pre-standard implementation of secure rtp. 711 a-law and ? 723.1 (6.3 kbps, 5.3 kbps). Adjustable audio frames per packet. Fax tone detection and pass-through using. Dtmf: in-band & out-of-band (rfc 2833) (sip info). Flexible dial plan support with interdigit timers and ip dialing. Call progress tone generation. Jitter buffer – adaptive. Vad – voice activity detection with silence suppression. Attenuation / gain adjustments. Mwi – message waiting indicator tones. Vmwi – visual message waiting indicator via fsk. Hook flash event signaling. Caller id generation (name & number) – bellcore, dtmf, etsi. Music on hold client. Streaming audio server – up to 10 sessions. Provisioning, administration & maintenance. Telephone key pad configuration with interactive voice prompts. Automated provisioning & upgrade via https, http, tftp. Asynchronous notification of upgrade availability via sip notify. Report generation & event logging. Stats in bye message. Syslog & debug server records – per line configurable. 1 10baset rj-45 ethernet port (ieee 802.3). Fxs: subscriber line interface circuit (slic). Ring voltage: 40-55 vrms configurable l. Ring frequency: 10 hz – 40 hz l. Ring waveform: trapezoidal and sinusoida l. Maximum ringer load: 3 ren. On-hook voltage (tip/ring): -50 v nominal. Off-hook current: 25 ma min. Terminating impedance: 8 configurable settings including. North america 600 ohms, european ctr21. Dc input voltage: +5 vdc at 2.0 a max. Power consumption: 5 watts. Switching type (100-240v) automatic. Power adapter: 100-240v – 50-60hz (26-34va) ac input, 1.8m cord. Click this link for. Set up the spa3000. Setting-up spa3000 as pstn gateway of spa9000. Click here to download the. Package include : spa3000 x 1 + spa9000 x 1. Customer service work time. If you have any questions, please click the contact with us via. 08:00am and saturdays 18:00pm to 01:00amexcluding weekends and china. You may expect to receive a response to your inquiry within 24 hours. (excluding weekends and china public holidays). Leaving negative feedback or netural feedback is never a. Good way to resolve problem. We hightly appreciate that you can contact. With us before you leaving negative feedback or neutral feedback. Will offer help to resolve your problems as fast as possible. Don’t leave the negative feedback. Due to when leave the feedback at. When close the transcation. Cannot help to do anything. Your may also like. Rechargeable 2.4ghz wifi wireless keyboard and touchpad. Robot arduino / raspberry pi.The item “Unlocked Linksys SPA9000 + SPA3000 IP PBX IPPBX Phone System Gateway PSTN” is in sale since Saturday, August 03, 2013. This item is in the category “Business & Industrial\Office\Telecom Systems\Phone Switching Systems, PBXs”. The seller is “sh.marvelousgoods” and is located in China. This item can be shipped worldwide.

  • Brand: Linksys
  • Model: SPA9000 + SPA3000
Be Sociable, Share!

Comments are closed.